Description: A low density closed cell PVC foam tape coated on one
side with a high performance acrylic adhesive, and carried
on a siliconized paper liner. Good combination of flexibility
and conformability with strength & wear resistance.
Excellent weatherability and chemical resistance. It is a
clean, waste free substitute for liquid sealants. An economical,
general purpose foam tape. Used in applications
requiring positive seals on irregular surfaces or when flexibility
and conformability to seal tight radius curves are critical
considerations.
Description:A medium density closed cell PVC foam tape coated on one
side with a high performance acrylic adhesive, and carried
on a siliconized paper liner. Higher density provides for a
tougher more durable tape product for more demanding
applications. Excellent combination of flexibility and conformability
with strength & wear resistance. Excellent
weatherability and chemical resistance. It is a clean, waste
free substitute for liquid sealants.
Description: An open cell polyester polyurethane foam tape coated
on one side with a high performance acrylic adhesive.
Flammability characteristics meets the requirements of
S4.3 of the Federal Motor Vehicle Safety Standard No.302 FMVSS 302.
Also meets the requirements of Underwriters Laboratories Standard for
Safety UL 94 for classification HF-1.
Density 2.00+- 10% lbs./ft3. Tensile: 25.0 psi. Elongation: 116%.
Tear Resistance, min, lbs/in: 1.5. Compression Set @ 50% Deflection,
Max %: 10. Compression Force Deflection, psi 25%: 0.74, 50%: 0.84
70%: 1.60. Cell Count 9visual), ppi: 50+- 5. Retention of tensile strength
after 22 hours dry heat Aging @ 140 deg. C. min %: 70.
Retention after 22 hours dry heat aging @ 140 deg C, min %: 70.
Back to top
Description: A Non-Skid textured finish on the uncoated side, this product is coated
on one side with a high tack permanent adhesive. Available in Non-Skid
diameter circles, kiss cut pieces on rolls and kiss cut pieces on pads.
Use NS 916 foam rolls to line store or display shelves to keep product
from slipping and NS 916 foam sheets to laminate your printed
plastic sheets in P-O-P counter mat production.
Description: A medium density closed cell black PVC foam tape coated on both sides with a high performance acrylic adhesive. Carried on a siliconized paper liner. Excellent combination of flexibility and conformability with strength & wear resistance. Excellent weatherability and chemical resistance. It is a clean, waste free substitute for liquid sealants.
Back to top
Description: A closed cell crosslinked polyethylene foam tape coated on both sides with a high performance solvent based acrylic
adhesive or rubber based adhesive. Excellent quick-stick sealing with high shear properties for efficient operation and
secure bonding. Good resistance to humidity, mild acids, oil and grease. Excellent conformability and compressibility.
Adheres well to textured and irregular surfaces. Can be easily die-cut. 3" neutral core/cartons. Available in white or black.
Available Remo 1 Side And Remo 2 Sides, White, Black A cross-linked closed cellular foam tape coated with a permanent adhesive one side and removable adhesive on the other side (Remo 1) or removable adhesive both sides (Remo 2) that can adhere and be removed from mounting surface. Ideal for lightweight point-of-purchase displays where a clean, easy removal is important.
Description: High Performance closed cell cross-linked polyethylene foam coated on both sides with a high performance solvent-based acrylic adhesive. Designed for window glazing, tape is
AAMA-certified tested and approved. Adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion and very good shear
strength. Outstanding resistance to weather for outdoor applications. Superior seal against dust and moisture due to flexible, soft foam. Easy peel poly release liner for continuous
& complete liner removal during window glazing applications. Other uses include mounting of emblems, nameplates, plastic strips, and mirrors.
Back to top
URETHANE Alternative...
Description: A black foamed acrylic core coated with high tack acrylic adhesive, white PE liner. Great balance of properties – high tack, high shear, strong cohesive strength. Flexible, moldable, compressible and conformable. Used to reduce and dampen vibration and shock. Used in high demand mounting applications (signage, graphics, auto trim attachment). 3" plastic core.
Description: This clear, not technically a foam , is a solid acrylic material which provides excellent clarity. These VHB Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications.
Back to top
Description: Clear foamed acrylic tape
9.8mils (0.25mm) exclusive of liner. Clear foamed acrylic with RED
PE liner. Ideal for structural bonding applications to mount/fix car
side molding and emblems. Used as a mounting tape in the illuminated
sign industry, for fabricating road signs, joining of metals and
plastic trims in furniture construction and architectural appliations.
180° Peel adhesion: 15.6 lb/in. Tensile adhesion: 40.2 lb/in.
Dynamic shear: 39.1 lb/in. Temperature resistance: up to°500°F
short term and up to 302°F long term. Cold temperature resistance:
down to -40°F. UV resistance: Good. 3" plastic core.
Double Coated Cloth Tapes:
A cotton cloth coated both sides with a high tack synthetic
rubber adhesive. Provides firm adhesion to most surfaces.
used for carpet installation on interior floors and stairs, on
commercial aircraft. Multi purpose use for industrial mounting/
holding. Also used as an excellent toupee tape.
Back to top
Adhesive Transfer Tapes:
Description: 2.0 mil. (90.5 mmo) Glass stabilized Solvent Based Acrylic Adhesive
wound on a white siliconized paper release liner (2.8 mil thick). Glass
stabilization allows for lathe slitting and cleaner unwinding. Moderate
adhesion to most surfaces makes this a very economical choice for
general purpose bonding/mounting applications. Extra wide web (59")
makes tape suitable for laminating. Peel adhesion: 54.8 oz/in.
Temperature range: -22°F to +356°F. 3" neutral core/carton.
Description:Permanent, Finger-Lift Edge Transfer Tapes...
A non-supported transfer tape containing a film of permanent adhesive
laminated to a release liner. The adhesive has a strong initial
tack that provides excellent adhesion on light to medium weight
paper, where permanent bonding is required. Designed not to
bleed through lightweight materials. Perfect for paper to paper
attachments, signs, posters, envelope sealing and direct mail
pieces, paper web splicing labels and business forms. Used on
high speed presses and collators, spot and strip tape applications.
Back to top
Description: Transfer tape with extended paper liner.
3.8 mil exclusive of liner (6.3 mil total with liner). A permanent nonsupported
transfer tape with a clear acrylic adhesive. Designed to
apply easily with all types of applicating equipment. Offered with a
42# or 54# liner, coated-side-in configuration. Removable: A nonsupported
transfer tape with a clear acrylic adhesive. This formulation
offers clean removability from a variety of substrates. Designed
to apply easily with all types of application equipment.
Description: A versatile double coated tissue tape with extended liner
Reinforced, tissue-supported adhesive for those demanding permanent
applications. This product offers excellent adhesion and
shear strength. Used for mounting heavy posters and signs, promotional
displays, inventory tags on cartons, mounting name
plates, permanent poly bag sealing, board envelope and box
fabrication, business forms presses and collators, tag and label
mounting, packaging and box closure.
Back to top
Description: A high adhesion permanent PET supported,specially formulated with a permanent double
coated tape available with extended (finger lift)
printed release paper liner. Perfect for paper,corrugated, and other substrates. Adhesion:
160 oz/in. Shear adhesion: 90+ hours
Description: A removable line of products offering a clear and lightweight adhesive
for those applications requiring temporary attachments.
Also provides a clean removal from a variety of surfaces. Perfect
for business forms, hospital forms, mailers, envelopes, labels,
advertisements, lightweight attachments that require a short
term bond.
Back to top
Double Coated Tapes with Differential Adhesion - High Tack/ Low Tack:
Description: 0.5 mil (12 micron). clear polyester film 3.0 mils total, differentially coated
with a removable/permanent bond synthetic rubber adhesive
system. Product is supplied with a 3 mil semi-bleached siliconized paper
release liner. The liner side is coated with a low tack, highly removable
clear adhesive system which exhibits moderate adhesion to a variety of
surfaces, but has excellent removability. The exposed side is coated with
an aggressive high tack, permanent clear synthetic copolymer adhesive
which forms a long-term bond immediately upon contact. Complies with
the FDA Code of Regulations. Tile 21, Part 175, Subpart B, Section
175.105, which covers the use of adhesive tapes for indirect food contact.
Adhesion: 80 oz/in. (exposed), 10 oz/in (liner side). Tensile
strength: 10 lbs/in. Elongation: 50% at break. Temperature range: 0°F to
+150°F. Application range: 60°F to +120°F. 3" neutral core/carton.
Back to top
Double Coated Film Tapes:
Description: Polypropylene 3.8 mil (0.97mm) exclusive of liner. 1.0 mil clear or white BOPP film. Synthetic hot melt rubber adhesive. 2.8 mil White paper release liner. Used for core start-ups, splicing, holding, joining, attaching, mounting, and laminating applications. Good tack on flat surfaces. Peel Adhesion: 73.1 oz/in. Tensile: 23 lbs/in. Elongation: 165%. Performing temperature: 14°F to +122°F. Temperature application: -4°F to +149°F short term. 3" neutral core/carton. Specify white or clear film when ordering.
Back to top
Double Coated Paper Tape:
Description: Double coated paper tape. Ideal for bonding together a wide variety of similiar and dissimiliar materials such as rubber, metals, wood, glass, papers, paints and many plastics. The paper carrier has been treated to improve its strength and removability.
Back to top
Metalized Polyester Film Tapes
Description: 0.9 mil Metalized Polyester Film with brilliant, vibrant mirror-like finish;
coated with an aggressive long lasting acrylic adhesive system.
Tapes have excellent chemical and thermal stability. Silver
can be qualified to meet Federal Specification #L-T-100B, Type II.
3" plastic core.
Back to top
Specialty Items:
Description: A thin, clear film "perforated" skip slit down
the center for easy separation of business forms.
Back to top
Description:Cork/ Rubber Tape is made of natural cork composition. Used for
sound deadening and insulation between metal and glass
panels. Cork/ Rubber Tape is a combination of cork and rubber used as an anti-skid
material for bases of lamps, business machines, rulers, ashtrays, etc.
Thickness available: 1/32" to 1/4"
Description: Commercial felt used to seal weather, dust, etc.
Thickness 1/16" to 1/4". Decorative felt used for general purposes. Standard green,
Brown, black, gray. Other colors available
Back to top |