High Temperature Tapes:
710C Polyester Splicing & Printed Circuit Board Tapes
(Clear)... Acrylic Adhesive
2.4 mil - Polyester film coated with a pre-cured solvent resistant
electrical grade acrylic adhesive. Tape thickness: 2.4 mils. Backing
thickness: 1.0 mil. Tensile strength: 24 lbs./in. Elongation: 100%.
Adhesion: 35 oz./in. Dielectric strength: 5,000 volts. Excellent
resistance to solvents, heat & chemicals. Used for component
packaging & electrical insulation, edge reinforcement on books,
webs, etc. Insulation class: 130°C. Exhibits high resistance to abrasives,
acids, oils, aging, staining and water immersion.
Temperature up to 310°F. 3" plastic core.
710C Polyester Splicing & Printed Circuit Board Tapes
72 YD (66M) |
WIDTH |
RLS/CS |
1/4" (6.3mm) |
144 |
3/8" (9.5mm) |
96 |
1/2" (12.7mm) |
72 |
5/8" (15.9mm) |
60 |
3/4" (19.0mm) |
48 |
1" (25.4mm) |
36 |
1.5" (38.1mm) |
24 |
2" (50.8mm) |
24 |
3" (76.2mm) |
16 |
711C, 711Y Polyester Splicing & Printed Circuit Board Tapes
Silicone Adhesive
2.5 mil - Clear polyester film coated with a pre-cured silicone adhesive.
Designed to be fully stable electrically and mechanically at
operating temperatures up to 350°F. Adhesive is cured to provide
maximum resistance to chemicals and leaves no residue during
masking or holding applications. Excellent resistance to abrasives,
acids, oils, aging, staining, and water immersion. Used to splice silicone-
coated paper and films. Also used as outer wrap on coils,
capacitors, motors, and transformers and for masking in electroplating,
anodizing, and PC boards. Tape thickness: 2.5 mils.
Backing thickness: 1.0 mil. Tensile strength: 29 lbs./in. Elongation:
110%. Adhesion: 27 oz./in. Dielectric strength: 6KV. Electrolytic
corrosion: factor: 1.10. Insulation class: 130°C.
Temperature range: (-100°F to +350°F). 3" plastic core.
711C, 711YPolyester Splicing & Printed Circuit Board Tapes
72 YD (66M) |
WIDTH |
RLS/CS |
1/4" (6.3mm) |
144 |
3/8" (9.5mm) |
96 |
1/2" (12.7mm) |
72 |
5/8" (15.9mm) |
60 |
3/4" (19.0mm) |
48 |
1" (25.4mm) |
36 |
1.5" (38.1mm) |
24 |
2" (50.8mm) |
24 |
3" (76.2mm) |
18 |
712Bl Polyester Splicing & Printed Circuit Board Tapes
(Blue)...
3 mil total - 1 mil Polyester film with 2 mils of a Silicone Adhesive
system. Resists fumes and chemicals, and leaves minimum
residue on removal. Allows visibility of circuitry after masking. Film
will not break or split during application or removal. A protective
tape, designed to perform well in all phases of masking operations
during printed circuit board production. Industry standard plater’s
tape. Protects surfaces from splashes and chemical fumes in
tin/lead stripping and gold tab plating. Adhesion: 32 oz/in. Tensile
strength: 24 lbs/in. Elongation: 80%.
Temperature range: -100° to +350°F. 3" plastic core.
712Bl Polyester Splicing & Printed Circuit Board Tapes
72 YD (66M) |
WIDTH |
RLS/CS |
1/4" (6.3mm) |
144 |
5/16" (7.9mm) |
120 |
3/8" (9.5mm) |
96 |
1/2" (12.7mm) |
72 |
5/8" (15.9mm) |
60 |
3/4" (19.0mm) |
48 |
1" (25.4mm) |
36 |
1.5" (38.1mm) |
24 |
2" (50.8mm) |
24 |
3" (76.2mm) |
18 |
4" (101.6mm) |
12 |
712RD(Red) - 712LB(Lt. Blue) - 712LG(Lt. Green) - 712W(White)
Polyester Splicing & Printed Circuit Board Tapes
3 mil total - 1 mil polyester film coated with 2 mils of silicone adhesive
system. Resists fumes and chemicals, and leaves minimum
residue on removal. Allows visibility of circuitry after masking. Film
will not break or split during application or removal. A protective
tape designed to perform well in all phases of masking operations
during printed circuit board production. Engineering grade plating
tape. Protects surfaces from splashes and chemical fumes in
tin/lead stripping and gold tab plating. Suitable for painting. Can
be used for splicing of certain silicone coated papers and films.
Adhesion to steel: 30 oz./in. Tensile strength: 24 lbs./in. Elongation: 100%.
Temperature range: -100° to +350°F. 3" plastic core.
tWhite only with paper core.
Red also stocked in 144 yd. lengths. Proportional pricing.
712RD(Red) - 712LB(Lt. Blue) - 712LG(Lt. Green) - 712W(White) Polyester Splicing & Printed Circuit Board Tapes
72 YD (66M) |
WIDTH |
RLS/CS |
1/4" (6.3mm) |
144 |
5/16" (7.9mm) |
120 |
3/8" (9.5mm) |
96 |
1/2" (12.7mm) |
72 |
5/8" (15.9mm) |
60 |
3/4" (19.0mm) |
48 |
1" (25.4mm) |
36 |
1.5" (38.1mm) |
24 |
2" (50.8mm) |
24 |
3" (76.2mm) |
18 |
4" (101.6mm) |
12 |
713EG - 713DB
Polyester Splicing & Printed Circuit Board Tapes
(Emerald Green)...
3.4 mil total - 2 mil emerald green polyester film tape and coated
with 1.4 mils of silicone adhesive. This heavy-duty silicone powder
coating masking tape provides a high temperature, high strength,
high chemical resistance and a “no-curl" mask in the toughest of
environments. This tape is designed to bond to low energy
surfaces, reduce failure due to slippage and remove with no adhesive
residue. Peel adhesion: 34 lb/in. Temperature resistance: 425°F.
3" plastic core.
(Dark Blue)...
3.4 mil total - 2 mil dark blue polyester film tape and coated with
1.4 mils of silicone adhesive. This heavy-duty silicone powder
coating masking tape provides a high temperature, high strength,
high chemical resistance and a “no-curl" mask in the toughest of
environments. This tape is designed to bond to low energy
surfaces, reduce failure due to slippage and remove with no
adhesive residue. Peel adhesion: 34 lb/in. Temperature
resistance: 425°F. 3" plastic core.
713EG, 713DB Polyester Splicing & Printed Circuit Board Tapes
72 YD (66M) |
WIDTH |
RLS/CS |
1/4" (6.3mm) |
144 |
5/16" (7.9mm) |
120 |
3/8" (9.5mm) |
96 |
1/2" (12.7mm) |
72 |
5/8" (15.9mm) |
60 |
3/4" (19.0mm) |
48 |
1" (25.4mm) |
36 |
1.5" (38.1mm) |
24 |
2" (50.8mm) |
24 |
3" (76.2mm) |
18 |
4" (101.6mm) |
12 |
714 - 715 Polyester Splicing & Printed Circuit Board Tapes
(Pink)...
2.5 mil translucent pink polyester film tape. 1 mil polyester film coated
with 1.5 mils of silicone adhesive. Bonds quickly to silicone coated
surfaces. Designed as a more stringent splicing tape for use on
all types of substrates. Used in splicing of silicone treated papers,
films and other substrates. Used for flexible circuit materials during
manufacturing and subsequent processing, and used as a protective
maskant on panels subject to mild caustic or acid bath etching and
plating. Adhesion to SST: 32 oz/in. Tensile strength: 27 lb/in.
Elongation (at break): 100%. Temperature resistance: long term
-60°F to 300°F/short term -60°F to 500°F. 3" plastic core.
714 - 715 Polyester Splicing & Printed Circuit Board Tapes
72 YD (66M) |
WIDTH |
RLS/CS |
1/4" (6.3mm) |
144 |
3/8" (9.5mm) |
96 |
1/2" (12.7mm) |
72 |
5/8" (15.9mm) |
60 |
3/4" (19.0mm) |
48 |
1" (25.4mm) |
36 |
1.5" (38.1mm) |
24 |
2" (50.8mm) |
24 |
3" (76.2mm) |
16 |
716EG Polyester Splicing & Printed Circuit Board Tapes
(Emerald green)...
3.6 mil total - Translucent 2 mil polyester film with 1.6 mils of a nonresiduing
pure silicone adhesive system. One of the cleanest and
strongest splicing tapes available. Its high adhesion and extremely
stable adhesive system give it excellent resistance to photo processing
chemicals, acids, oils, solvents, aging, staining and
water immersion. A superior performance leader card splicing tape.
Used for splicing siliconized papers, films and non-woven materials
in converting. Used for masking adhesive seams in metal bonding
processes. Adhesion: 28 oz/in. Tensile: 51 lbs/in. Elongation: 110%.
Temperature range: up to 350°F. Insulation class: 130°C (UL-510).
3" plastic core.
716DB Polyester Splicing & Printed Circuit Board Tapes
(Dark blue)...
3.6 mil total - Translucent 2 mil polyester film with 1.6 mils of a nonresiduing
pure silicone adhesive system. One of the cleanest and
strongest splicing tapes available. Its high adhesion and extremely
stable adhesive system give it excellent resistance to photo processing
chemicals, acids, oils, solvents, aging, staining and
water immersion. A superior performance leader card splicing tape.
Used for splicing siliconized papers, films and non-woven materials
in converting. Used for masking adhesive seams in metal bonding
processes. Adhesion: 28 oz/in. Tensile: 51 lbs/in. Elongation: 110%.
Temperature range: up to 350°F. 3" plastic core.
716BR Polyester Splicing & Printed Circuit Board Tapes
(Brown/Rust)...
3.6 mil total - Translucent 2 mil polyester film with 1.6 mils of a nonresiduing
pure silicone adhesive system. One of the cleanest and
strongest splicing tapes available. Its high adhesion and extremely
stable adhesive system give it excellent resistance to photo processing
chemicals, acids, oils, solvents, aging, staining and
water immersion. A superior performance leader card splicing tape.
Used for splicing siliconized papers, films and non-woven materials
in converting. Used for masking adhesive seams in metal bonding
processes. Adhesion: 28 oz/in. Tensile: 51 lbs/in. Elongation: 110%.
Temperature range: up to 350°F. 3" plastic core.
716EG, 716DB, 716BR Polyester Splicing & Printed Circuit Board Tapes
72 YD (66M) |
WIDTH |
RLS/CS |
1/4" (6.3mm) |
144 |
5/16" (7.9mm) |
120 |
3/8" (9.5mm) |
96 |
1/2" (12.7mm) |
72 |
5/8" (15.9mm) |
60 |
3/4" (19.0mm) |
48 |
1" (25.4mm) |
36 |
1.5" (38.1mm) |
24 |
2" (50.8mm) |
24 |
3" (76.2mm) |
16 |
4" (101.6mm) |
12 |
|